Barreto 4" x 36" 4 Wheel Drive Trencher

*Comes on its own trailer - 2" ball required to tow it

Four Wheel Drive System

With SnapLoc™ in down position

Superb traction in mud, sand, and soft ground.

Shifts fulcrum point applying more pressure on boom for better ground penetration.

More flotation and better traction for crossing furrows or cross-trenching.

Maintains effortless straight-line trenching.

Better balance and weight distribution for easy pivoting.

Eliminates kick-back when hitting rocks or other obstacles.

Boom will not "ride up" when digging shallow trenches, or when trenching downhill. Maintains constant depth.

Eliminates weight shift for safer loading and unloading on inclines such as ramps and drop gate trailers.

Direct Hydraulic Drive to Head Shaft

No Belts - No Gears - No Chains

Lower Center of Gravity

Outboard Support Bearing - Standard

Safety Clutch Stops Wheels and Chain Immediately

No micro switches to fail
Engine continues to run
No need to readjust ground speed when resuming operation

Hydraulic Chain Reverse to Dislodge Rocks and Debris

Operator need not leave control position

Finer Degree of control for Trenching Ground-Speed

Ground speed control lever to ground speed ratio
Forward: 1:1 - Reverse: 2:1

Barreto Tough - Barreto Reliability!

SPECIFICATIONS AND FEATURES

DIMENSIONS:

Trench Depth Trench width Boom Travel - Up Boom Travel - Down Head Shaft Height Digging Chain Transport Length Front Wheel to Handlebar Boom to Handlebar Transport Width Transport Height Wheel Base Trench Center to Outside Right Trench Center to Outside Left

36" 4" 60 Degrees 60 Degrees   8" 83" 88" 35" 46" 35" 16" 18"

OPERATION:

Ground Speed

Forward 180 fpm

Reverse 90 fpm

Digging Chain Speed  260 fpm

Weight 900 lbs

Recommended safety gear: